We are often asked about installing solar panels on residential flat roofs. Sadly, most of the time it’s not practical – at least for retrofits. For extensions, new builds and commercial flat roofs, solar PV is still worth considering.
Let’s delve into the reasons behind this.
Retrofitting solar PV on domestic flat roofs
There are a few common issues with retrofitting solar to domestic flat roofs:
- Planning permission is required for all domestic flat roof installations, as the panels will project above the highest part of the roof (excluding chimneys). This adds cost and time to the project.
- Flat roof solar takes up more space per kW than sloping roofs, as the rows of panels need to be spaced to prevent shading. There also needs to be a border of up to 1m around the edge of the roof. On smaller domestic roofs, this often means insufficient space for a viable solar system.
- Access and labour costs can be higher. Flat roofs always need scaffolding (even for single storey buildings), and this cost rises with the height of the building. Carrying the heavy concrete ballast up to the roof adds to the install time and labour costs.
As a rough comparison, domestic flat roof PV is around 25% more expensive than that on sloping roofs.
Customers often ask if it’s possible to install solar panels on flat roofed dormers. The main problem with this is that dormers aren’t structurally strong enough to support the weight of the ballasting we usually use on flat roofs. So the PV mounting will need to be fixed through roof penetration. Given the need to maintain watertightness, this is more complex and over 50% more expensive.
New build/extension flat roofs
While we generally wouldn’t recommend installing solar PV on existing residential flat roofs, the exception is with new build properties and extensions (as pictured above). In this case, the new roof can be designed to ensure it’s strong enough to withstand the weight of the system and it can be installed during the build, saving on install costs.
It’s also more viable to install roof-penetrating mounting in a new build, as the roofer can fit and seal integrated fixing posts at the build stage. We can then install a flat solar array, avoiding shade spacing between panels to maximise the number of panels on the available roof space.
Commercial flat roofs
Commercial flat roofs are a very different situation to domestic properties:
- Planning permission is rarely required for installing solar PV on commercial flat roofs.
- Commercial properties generally have large roof space, allowing plenty of room for a sufficient number of solar panels, even despite the lower kW/m2 than on sloping roofs.
- Access and labour costs become more cost-effective with economies of scale. Most commonly with commercial flat roofs, we use edge protection or mansafes for installation, and some buildings already have sufficient access in place.
So it’s well worth considering solar PV for commercial flat roofs, particularly as these premises often have high daytime energy consumption, helping to maximise savings from solar.
What you can do if your roof isn’t suitable
Realistically, if you can only fit a handful of panels on your roof then it doesn’t make financial sense. There are a few other options available, to help make your energy usage cheaper or more environmentally beneficial.
The first step to save money on your energy bills is by switching supplier. Choosing a green tariff will improve the environmental impact. You could also look into investing in a community energy project, offering shares in a local solar or wind farm.
It’s also worth considering switching to an electric car, some of which are now more affordable than petrol vehicles.