August 31st, 2020 by Press Release
The world’s first electrically powered and armored money transporter was handed over to the international security service provider Prosegur at the beginning of August. The MAN eTGE electric van, which was converted into a money transporter by STOOF, will be put through its paces straight away during Prosegur’s daily cash-in-transit operations.
In the logistics industry, environmental protection and sustainability are key measures of a company’s future viability, as is the case in many industries. The best example of this: At the beginning of August, an MAN eTGE with special-purpose armoring from the body manufacturer STOOF was handed over to the money and valuables transportation company Prosegur at STOOF’s company premises in Borkheide near Potsdam. The new member of the Prosegur vehicle fleet is the first fully electric, armored money transportation vehicle in the world. “Given the fact that our Group safely transports the equivalent of 550 billion euros every year using all modes of transportation, it is of vital importance that we embrace our role as a driver of innovation at all times and also bear responsibility for doing business in a sustainable manner,” says Jochen Werne, Chief Development Officer at Prosegur Deutschland.
The MAN TGE 3.140 E panel van, which will head straight out onto the roads around Potsdam for Prosegur, was fitted with level FB3 armoring by STOOF International. The body manufacturer was faced with the challenge of using extremely lightweight materials that have the same resistance class. The electric van can seat a maximum of three people. Including the armoring, its unladen weight is around 3,150 kg.
Prosegur has close to 900 vehicles on the road throughout Germany, both for interregional transportation and inner-city operations. When it comes to inner-city operations, the vehicles only ever cover short distances; typically 60 to 70 kilometres a day. With a range of 120 to 130 kilometres (115 km according to the current WLTP cycle) in a real-life city setting, the range of the eTGE is more than adequate. And it’s during inner-city money transportation operations that the driver can take full advantage of the MAN eTGE’s extensive safety features. The MAN eTGE has a parking assistance system with side protection, a rear-view camera, a speed control system, a periphery monitoring system with a city emergency braking function, Emergency Brake Assist (EBA) and LED headlights.
Prosegur is now putting the electric vehicle through testing. One challenge that the company will face in day-to-day business is the payload. The vehicle load capacity is restricted by the compulsory safety armoring used in the money and valuables transportation industry.
But that does not put the Chief Development Officer of Prosegur Deutschland off: “Transformation can be achieved even in complex conditions,” says Jochen Werne, assuredly. “We are confident that our ecological and economic goals are compatible.” If the test phase is successful, Prosegur intends to acquire more vehicles with an electric drive.
Environmentally friendly, sustainable, safe: the MAN eTGE as an armored money transporter being handed over to the security service provider Prosegur.
The vehicles and products displayed on this website may differ in terms of shape, design, colour and scope of supply. Some of the images may include special equipment, accessories and decorative elements which are subject to an additional charge. The technical features and equipment of the vehicles described are merely examples and may differ, in particular on a country-specific basis. We reserve the right to make changes at any time.
Our vehicles are equipped with summer tyres as standard. Please check possible national regulations about whether winter tyres are required. Your MAN partner will be happy to advise you.
The specified fuel consumption and emission data has been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. It is currently still required by law to state the NEDC figures for vehicles for passenger transport with registration class M1. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering.
Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle.
Efficiency classes rate vehicles for passenger transport with an M1 passenger vehicle registration, according to the CO2 emissions under consideration of the empty vehicle weight. Vehicles which conform to the average are classified as D. Vehicles which are above the current average are classified as A+, A, B or C. Vehicles which are below average are classified as E, F or G.
Additional information regarding the official fuel consumption, and the official specific CO2 emissions of new vehicles for passenger transport, with an M1 passenger vehicle registration, can be found in the “Guide on the fuel economy, CO2-Emissions, and power consumptions of all New Passenger Car Models”. This guideline is available free of charge at all sales points and from the DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany. (https://www.datgroup.com/)
In vehicle classes N1, N2 and M2, coolant of the type R134a is used. MAN TGEs of vehicle class M1 require coolant of the type R1234yf. The GWP value of the coolant used is 1.430 (coolant type R134a) and 4 (coolant type R1234yf). The fill levels depend on the coolant compressor and varies between 560–590 grams.
News and images courtesy of MAN.
Have a tip for CleanTechnica? Send us an email: firstname.lastname@example.org
Latest Cleantech Talk Episode